STBR004K
When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.
If your sway bar is out of alignment then handling can be affected & this great little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.
82mm Bolt Spacing
Please Note: Prado 120 Series have a build variation with regard to the front sway bar bracket hole spacing. There is no link back to a specific year or VIN, so measuring the spacing needed is required to get the accurate fit. This is for the 82mm hole centre/centre if you require the 76mm option please see STBR003K.
Sold as a PAIR
Sway Bar Relocation Brackets (Fr) Compatible W/ Toyota Prado 120/150 W/Out Kdss (82mm Hole C/C)
STBR003K
When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.
If your sway bar is out of alignment then handling can be affected & this great little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.
76mm HOLE C/C - 16.5mm Relocation
Please Note: Some KUN may require rad support to be notched or spaced for clearance to swaybar.
Please Note: Prado 120 Series have a build variation in regard to the front sway bar bracket hole spacing. There is no link back to a specific year or VIN, so measuring the spacing needed is required to get the accurate fit. This is for the 76mm hole centre/centre if you require the 82mm option please see STBR004K
Sway Bar Relocation Brackets (Fr) Compatible W/ Toyota Hilux KUN 2005-15 (76mm Hole C/C)
STBR002K
When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.
94.5/96mm HOLE C/C -26.5mm Relocation
If your sway bar is out of alignment then handling can be affected & this great little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.
*Not Recommended for fitment with ARB SUMMIT Bar & KDSS due to a Clearance Issue
STBR001K
When fitting suspension & lifting vehicles more than 2" it is advisable to fit a sway bar relocation plate to your front sway bar.
If your sway bar is out of alignment then handling can be affected & this great little product from Blackhawk can help you enjoy your vehicle. It will adjust & correct angles created when you have installed a lift by lowering the mounting position of your sway bar down to the correct position needed to improve ride handling.
Blackhawk 4x4 Sway Bar Links & Extensions. Sway Bar Relocation Brackets (Fr) Compatible W/ Hilux Revo (86mm Hole C/C)
STBJK02R
Blackhawk 4x4 offer an upgraded sway bar extension link kit for your JK. If your sway bar is out of alignment, handling can be affected. Manufactured with an OE quality fit & finish these kits can be used on JK Jeeps with 2-6" lift, just trim for smaller lifts. Easily installed & using quality hardware, this is a great addition to your suspension upgrade.
Features
- Reduces clearance issues between tyre & rear sway bar.
- Cap head bolt on upper link end to maximise tyre clearance.
- Quality rose joint ends, completely eliminate any bushing deflection resulting in improved sway bar efficiency.
- Direct bolt-on ends to aid in eliminating excess play during sway bar loading.
- Fully greasable ends for long term durability.
- OE quality fit & finish.
- Easy installation.
- Fully adjustable 2-6" lift (trim to suit smaller lifts)
Sold as a Pair
STBJK01A
The Blackhawk 4X4 STBJK01A Sway Bar Disconnect has been designed with adjustability to suit a huge variety of lifts for the JK Wrangler from standard 2" to 8" lift.
It is supplied complete with brackets that you install to simply hook the sway bar onto, to keep the sway bar from dragging on the ground following disconnect. Includes retention brackets.
Spare Parts are available for our entire product range!
Bush Part Number: STBJK01A-BUSH
STB896KITEXT
From the premium Blackhawk range, is the STB896KITEXT which has been designed & manufactured as a complete kit for the rear of your 200 series with KDSS.
The kit consists of:
- STB8961EXT
- STB8962EXT
- Associated Hardware for both kits.
The Blackhawk STB8962EXT is a one piece forged design with OE spec rubber bushings & ball stud to replicate the OE item in function & appearance suited to KDSS 200 Series with 50mm+ suspension lift.
The new Roadsafe RH rear extended sway bar link has been
designed to work in conjunction with the new STB8962EXT
50mm dropped forged LH rear link to allow for considerably
increased suspension travel on 200 series KDSS vehicles
when fitted with longer travel shocks (length to be checked &
confirmed prior to fitment
The new link includes a 50mm drop at the swaybar mount pivot, compared to the OE arm, allowing considerably increased suspension travel for 200 Series with KDSS when modified to run longer travel shocks (length to be checked & confirmed prior to fitment) and other supporting modifications such as the Roadsafe APR015 (adjustable rear panhard rod) TALC201B (rear upper offset trailing arms) plus other 200 Series components.
STB8962EXT is a DIRECT replacement for the LH Rear Link. The extended STB8961EXT is to be used to accommodate the RH Rear Link requirements.
With most state laws requiring sway bars to be kept in your vehicle in order to stay roadworthy these extension kits make it easy to stay safe & legal!
LH RR 50mm Dropped Sway Bar Link (Forged) & Rh RR 50mm Extended (Suits 2-3) - compatible with Toyota Landcruiser 200 KDSS
STB8962EXT
From the premium Blackhawk range, is the STB8962EXT which has been designed & manufactured in a one piece forged design with OE spec rubber bushings & ball stud to replicate the OE item in function & appearance suited to KDSS 200 Series with 50mm+ suspension lift.
The new link includes a 50mm drop at the swaybar mount pivot, compared to the OE arm, allowing considerably increased suspension travel for 200 Series with KDSS when modified to run longer travel shocks (length to be checked & confirmed prior to fitment) and other supporting modifications such as the Roadsafe APR015 (adjustable rear panhard rod) TALC201B (rear upper offset trailing arms) plus other 200 Series components.
STB8962EXT is a DIRECT replacement for the LH Rear Link. The new extended STB8961EXT is to be used to accommodate the RH Rear Link requirements.
With most state laws requiring sway bars to be kept in your vehicle in order to stay roadworthy these extension kits make it easy to stay safe & legal!
Lh RR 50mm Dropped Sway Bar Link (Forged) - compatible with Toyota Landcruiser 200 Kdss
STB8845ETV2
Blackhawk 4X4 offers a range of upgraded extended Sway Bar Links for Nissan Patrols. If your Sway Bar is out of alignment, handling can be affected. Realign your Sway Bar with Roadsafe Sway Bar Links & Extensions.
If you hear an odd ‘knocking’ sound from your front end, check your Sway Bar Links. If they are loose or look like the rubber or urethane is worn – replace them! It is generally a cheap DIY job and can save you dramas down the track!.
Heaps more Sway Bar Links are available, including a huge array of Blackhawk 4X4 applications. Email or call with your specific enquiry.
Please note – various Extended Sway Bar Links, depending upon your State Regulations, are sold for off road use only, and are subject to limited warranty dependent upon application.
Nissan Navara D23 Rear ExtendedSwaybar Link
STB8844ET
Designed to suit 2-8" lifts, the Blackhawk 4X4 heavy duty "extended thread' links allow you to effectively trim the sway bar link to your desired length to provide adequate tail shaft clearance and sway bar alignment.
Manufactured from Heavy Duty 16mm rod, Roadsafe heavy duty sway bar links offer both increased strength and increased stud articulation, providing for less stress on the sway bar links during wheel articulation.
Fr + RR Rh Extended Thread-Suits 2-8 (12mm Studs) - compatible with Nissan Patrol GQ/GU
STB8833ETV2
Designed to suit 2-8" lifts, the Blackhawk 4X4 heavy duty "extended thread' links allow you to effectively trim the sway bar link to your desired length to provide adequate tail shaft clearance and sway bar alignment.
Manufactured from Heavy Duty 16mm rod, Roadsafe heavy duty sway bar links offer both increased strength and increased stud articulation, providing for less stress on the sway bar links during wheel articulation.
RR Lh-2-8 Lift W/ Extended Thread - compatible with Nissan Patrol GU
STB8828ETV2
Blackhawk 4X4 offers a range of upgraded extended Sway Bar Links for Nissan Patrols. If your Sway Bar is out of alignment, handling can be affected. Realign your Sway Bar with Roadsafe Sway Bar Links & Extensions.
If you hear an odd ‘knocking’ sound from your front end, check your Sway Bar Links. If they are loose or look like the rubber or urethane is worn – replace them! It is generally a cheap DIY job and can save you dramas down the track!
Heaps more Sway Bar Links are available, including a huge array of Blackhawk 4X4 applications. Email or call with your specific enquiry.
Please note – various Extended Sway Bar Links, depending upon your State Regulations, are sold for off road use only, and are subject to limited warranty dependent upon application. Fr + RR Rh Extended Thread-Suits 2-8 - compatible with Nissan Patrol GQ/GU
